Refitting - Sea Villa 32' LEREK2

Post Reply
bikedumpdave
Posts: 39
Joined: Sat Dec 24, 2011 3:55 pm
Location: 407 catherine st Ottawa
Contact:

Refitting - Sea Villa 32' LEREK2

Post by bikedumpdave »

This is a work in progress,

The boat, 'SEA BREEZE' ? , was on Rice Lake, near Hastings, Ontario. Then in 1974 or 75, Jack Hearn,
purchased it and moved it to Westport.Jack belonged to all the local service clubs, and I always remember it having lots of people on board when ever we visited Westport, It was the first boat I ever saw with a telephone, then Jack installed Merts electric organ for entertainment. Jacks stories and Merts music , the entertain hub of Westport, back in the 80's !

The boat had been literally unused for 5 yrs , in 2005, when Andrew Organ let us know it was for sale.
We made the decision first day , that we would take on the rebuilding process if the price was right.
Money changed hands, 3 days of mould removal , a truck load of garbage, a good hosing down,
and it was trailer-ed from Franklins Marina near ,Caffey's locks to ,' Ludlows' Boat Works,
north of , Kempville Ontario. Arriving sept. of 2005. [first job , lets remove all the hull paint]

CLICK ON PIC TO ENLARGE
Attachments
Captain Jack -    back in the day<br />Ottawa  1996 @  National Art Centre
Captain Jack - back in the day
Ottawa 1996 @ National Art Centre
2005 SOLD ,  AS-IS <br /> Franklins marina@Chaffeys
2005 SOLD , AS-IS
Franklins marina@Chaffeys
1999 -  Almost new , out drive
1999 - Almost new , out drive
Last edited by bikedumpdave on Sun Jan 12, 2014 5:44 pm, edited 4 times in total.
bikedumpdave
Posts: 39
Joined: Sat Dec 24, 2011 3:55 pm
Location: 407 catherine st Ottawa
Contact:

Re: Refitting - Sea Villa 32' LEREK2

Post by bikedumpdave »

Well gees , just a little wire brushing and all this paint should be gone?
Attachments
Paint flaking off,  no under coating
Paint flaking off, no under coating
Bottom damage form Fraklins trailer
Bottom damage form Fraklins trailer
bikedumpdave
Posts: 39
Joined: Sat Dec 24, 2011 3:55 pm
Location: 407 catherine st Ottawa
Contact:

Re: Refitting - Sea Villa 32' LEREK2

Post by bikedumpdave »

2- lrg electric grinders, with cup style wire wheels, 2 strong 'hearted' men and a lot of cases of beer,
lets get at her , boy , did we take on something we couldn't finish, 'NO' we would win, unless, it killed us !
Attachments
apr -may- june, and not yet  1/2 done<br />some places it falls off, others are like glued
apr -may- june, and not yet 1/2 done
some places it falls off, others are like glued
All summer 2006 , sore arms ,sore back<br />laying down on the job covered in red oxide
All summer 2006 , sore arms ,sore back
laying down on the job covered in red oxide
cleaner than a babys bottom,<br /> ready for Interlux primer
cleaner than a babys bottom,
ready for Interlux primer
Last edited by bikedumpdave on Tue Oct 28, 2014 9:33 pm, edited 3 times in total.
bikedumpdave
Posts: 39
Joined: Sat Dec 24, 2011 3:55 pm
Location: 407 catherine st Ottawa
Contact:

Re: Refitting - Sea Villa 32' LEREK2

Post by bikedumpdave »

The very bottom was badly pitted from electrolysis , the action and heat from the heavy wire wheel, blended/ restored a smooth surface, finding 1 hole , looks as if someone drove a nail thru from the inside bottom engine compartment.
No thin spots or delamination, very solid and clean .the keel is wavy / bent, but all is ready for the black Interlux / sealer
and paint. So what colour , our old boat was red , lets try a test strip around the bumper rail,
Well Ludlows was not the place to fix anything, and Phil was no help, but demanded top dollar for store-age.
Traveling out there was to far , electricity was a problem, then are 4 old merc gas cans ,some tools,
and building materials dis-appeared. Someone rummaged thru the boat taking gaffer tape ,
broom and Captain Jacks Chart Box . who knows what else . It was time to move on.

Chris Hurst and the, http://www.hurstmarina.com/ ,crew made quick work of this,
and we were at Master Carpenter Dan Smiths shop, in Manotick Station ASAP
Attachments
Lets put on a hat and see how that looks<br />Am I dreaming , could we build a fly bridge?
Lets put on a hat and see how that looks
Am I dreaming , could we build a fly bridge?
First pics @ Manotick
First pics @ Manotick
Last edited by bikedumpdave on Wed Jan 08, 2014 6:38 pm, edited 5 times in total.
bikedumpdave
Posts: 39
Joined: Sat Dec 24, 2011 3:55 pm
Location: 407 catherine st Ottawa
Contact:

Re: Refitting - Sea Villa 32' LEREK2

Post by bikedumpdave »

Well we found that Phils advise was not going to work , as when we were closely following the boat on the trailer,
down the road, we could see the upper cabin moving side to side , on the hull wall by 2 to 3 inches , Holy Shit
Well we will tare out some more walls and make a decision, this fall. List's for Materials inside/ out side/ upper/ lower ,,
95% of these items were sourced from; http://www.habitatncr.com/ , Restore, Value Village, Neighborhood Services, & Salvation Army Stores.I figure we saved 60% off regular prices . Then to the, http://www.thechandleryonline.com/ ,
and spent 7 grand! Lets work out side while the weather permits!
Attachments
I think we can / I think we can,<br />    bigger is better right?
I think we can / I think we can,
bigger is better right?
2008 - Should we do something crazy,<br />'Burt Reynolds' had a 2 story house boat?
2008 - Should we do something crazy,
'Burt Reynolds' had a 2 story house boat?
2009- Yes we are building up-ward <br />Not just fly bridge but also sleeping cabin
2009- Yes we are building up-ward
Not just fly bridge but also sleeping cabin
Last edited by bikedumpdave on Sat Jan 11, 2014 11:50 am, edited 7 times in total.
bikedumpdave
Posts: 39
Joined: Sat Dec 24, 2011 3:55 pm
Location: 407 catherine st Ottawa
Contact:

Re: Refitting - Sea Villa 32' LEREK2

Post by bikedumpdave »

Well Captain Jack worked for Air Canada, so it is only fitting to have a wing on his boat ???
How do we know if its going to look 'GREAT' trial and error' till we gets it right !

Now its back to the old problem the dam, 'ROTT'
Attachments
Yes we will have a wing<br />but winters here , better to inside work
Yes we will have a wing
but winters here , better to inside work
More 'wing dreams'
More 'wing dreams'
More rot , than we thought
More rot , than we thought
Last edited by bikedumpdave on Sat Jan 11, 2014 11:53 am, edited 2 times in total.
bikedumpdave
Posts: 39
Joined: Sat Dec 24, 2011 3:55 pm
Location: 407 catherine st Ottawa
Contact:

Re: Refitting - Sea Villa 32' LEREK2

Post by bikedumpdave »

Well it was not a pretty site to see all the old materials being junked, but the mould was every-where
Everything was removed in the lower area, except the marine plywood flooring and stern wall.
Now again we have to be careful not to add weight. So every thing was done minimal, and glued together
to keep water out, and add strength. The roof had fallen,as the old sill was gone/ rotted, the walls had to
raise the roof back up to old height. Then the sill was reattached to the hull wall, with the same old aluminum strip.
Wires and more wires , hydraulic lines, drive cables... you name it , we snaked it before instating the paneling.
Once in place ,we added Styrofoam insulation and spray foam to tighten things up but didn't put in a vapor barrier,
as we didn't want to trap moister. We used the best grade of paneling we could source and double sealed,and varnished both sides before installation. There sure is a lot of room with everything out. Now to try and find how we want to lay out the seating ? Using the old table and benches from our old house boat!
Attachments
All Rott removed, and the rebuilding process starts<br />Walls were completely torn out, to bare Aluminum
All Rott removed, and the rebuilding process starts
Walls were completely torn out, to bare Aluminum
The sill ,wall bracing and backing plywood, <br />replaced  from entrance door to bathroom
The sill ,wall bracing and backing plywood,
replaced from entrance door to bathroom
Insulation , corner bracing, wiring, and  paneling.<br />Ruffed in benchs , some from our, old house boat
Insulation , corner bracing, wiring, and paneling.
Ruffed in benchs , some from our, old house boat
Last edited by bikedumpdave on Sat Jan 11, 2014 11:57 am, edited 3 times in total.
bikedumpdave
Posts: 39
Joined: Sat Dec 24, 2011 3:55 pm
Location: 407 catherine st Ottawa
Contact:

Re: Refitting - Sea Villa 32' LEREK2

Post by bikedumpdave »

Getting thing the right size to fit the scale of the boat was time consuming.Change after change?
Some like it one way, others another way, lots of ideas. Decisions to be made without any reference.
Attachments
Final assembly, we think we got it to scale<br />but we wont really know till its in the water
Final assembly, we think we got it to scale
but we wont really know till its in the water
Plywood c/w aluminum edges ,plasticore<br />with plastic pipe edges .Then came the holes
Plywood c/w aluminum edges ,plasticore
with plastic pipe edges .Then came the holes
I think we got it the right size<br />maybe just a little higher?
I think we got it the right size
maybe just a little higher?
Last edited by bikedumpdave on Sat Dec 14, 2013 5:19 pm, edited 1 time in total.
bikedumpdave
Posts: 39
Joined: Sat Dec 24, 2011 3:55 pm
Location: 407 catherine st Ottawa
Contact:

Re: Refitting - Sea Villa 32' LEREK2

Post by bikedumpdave »

Almost to the point we could sit down for a break? Our minds were made up, and things where getting screwed
into place. Sheet metal shrouds were made for venting the fridge and stove. Propane installed and the beer,
was cold and supper on the stove .Temporary step was rigged, between lower, and entrance levels,
will just one step work? Head connections made, some mirrors hung. Steps to the upper bimini
sleeping cabin finished, now we know where to cut the hole in the ceiling? where's 'Danno' ?
Attachments
Stove- Fridge ,and kitchen installed<br />temporary step rigged
Stove- Fridge ,and kitchen installed
temporary step rigged
Head walls in place, my girlfriends happy now<br />Riser and head connections finished , no leaks yet?
Head walls in place, my girlfriends happy now
Riser and head connections finished , no leaks yet?
Walls paneled mirrors hung<br />Upper bimini-sleeping cabin, steps finished
Walls paneled mirrors hung
Upper bimini-sleeping cabin, steps finished
Last edited by bikedumpdave on Sat Dec 14, 2013 5:20 pm, edited 1 time in total.
bikedumpdave
Posts: 39
Joined: Sat Dec 24, 2011 3:55 pm
Location: 407 catherine st Ottawa
Contact:

Re: Refitting - Sea Villa 32' LEREK2

Post by bikedumpdave »

Driving a boat with the steering wheel vertical , for any length of time has always been a problem for me,
So lets remove the old dash board, and install some nice wood from the old house boat, to make a angled dash
with a useable driving station. Long winter of attaching hydraulic lines,and plumbing in the upper driving station.
Reinstalling the old engine/ boat controls. Rigging the radio shelf ,installing fans. Connecting wires, 120 & 12volt thru-out. Bathroom door hung, drawers finished,12 days of sanding ,some sealer / varathane satin exterior Spar varnish applied. ' BEAUTIFUL' Vanishing in the rain always works and looks like a pro did it !
Attachments
Old vertical dash gone<br />Veneer dash and 40 deg. driving station in
Old vertical dash gone
Veneer dash and 40 deg. driving station in
Helm and hydraulics  plumbed<br />Radio shelf  cooling fans installed
Helm and hydraulics plumbed
Radio shelf cooling fans installed
Dash board, shelf's,and doors  finished<br />Bathroom door hung, some stain/varnish applied
Dash board, shelf's,and doors finished
Bathroom door hung, some stain/varnish applied
Last edited by bikedumpdave on Wed Jan 08, 2014 7:27 pm, edited 4 times in total.
bikedumpdave
Posts: 39
Joined: Sat Dec 24, 2011 3:55 pm
Location: 407 catherine st Ottawa
Contact:

Re: Refitting - Sea Villa 32' LEREK2

Post by bikedumpdave »

A good clean up and some discus-sting BLUE paint.
Next the all important back scratching post , hooking up the lights and appliances'
Sealing and staining the 20 some door and draw panel facings, cutting and installing trim.
Ceiling trusses and 3 support beams , should hold up the roof , with all us fat people up there.
Drawers in storage places , seat top storage bulk heads for life jackets,organized storage to remove junk/clutter.
The look and feel of our old house boat are starting to come back.
PROBLEM, the windows won't open ,without, major force! Maybe we should get an air conditioner or 3 ?
Attachments
Nov. 2008- Cleaned up , and defaced with gross BLUE paint<br />Next ,  install all the Old House Boat, furniture and  fixtures
Nov. 2008- Cleaned up , and defaced with gross BLUE paint
Next , install all the Old House Boat, furniture and fixtures
The all important back scratching post and table <br />May 2009 -Starting to feel like home
The all important back scratching post and table
May 2009 -Starting to feel like home
bikedumpdave
Posts: 39
Joined: Sat Dec 24, 2011 3:55 pm
Location: 407 catherine st Ottawa
Contact:

Re: Refitting - Sea Villa 32' LEREK2

Post by bikedumpdave »

With a little shimming and some new window rope , we got all the window working better than ever.
Widow locking bars installed, on All openings, the old curtains repair cleaned and fitted, improved site lines,
and made a much fuller look. Visited Ken Mason Marine,in Portland , purchased more windows from an old 3 boys ,
to install in the upper sleeping cabin, also got a 12 volt switch and furnace , plus lots of strips of aluminum trim .
Now comfort items, some out door patio-furniture cushions, carpet, old boat pics and items hung on the walls.
June 2011-TV DvD ,furnace, micro wave, dishes, some personal items, and we are ready to hit the water !
Well since we haven't made a final decisions on the interior furnishings's , A can't show you a lot of beautiful luxurious
interior photo's. We have made it comfortable, but my girl friend keeps changing her mind, not the finished product yet !
Attachments
Sept. 2010- Rear living area, ruffed-in interior, <br /> Curtains, carpet, and seat cushions
Sept. 2010- Rear living area, ruffed-in interior,
Curtains, carpet, and seat cushions
May 2011 Micro-wave ,TV hidden under front riser<br />Keeping  things out of site , weight low, and the dog Terra
May 2011 Micro-wave ,TV hidden under front riser
Keeping things out of site , weight low, and the dog Terra
Last edited by bikedumpdave on Wed Jan 08, 2014 7:28 pm, edited 4 times in total.
bikedumpdave
Posts: 39
Joined: Sat Dec 24, 2011 3:55 pm
Location: 407 catherine st Ottawa
Contact:

Re: Refitting - Sea Villa 32' LEREK2

Post by bikedumpdave »

Sleeping cabin widows fitted, and final assembly glued to-gather. Some paint and the family crest.
With the sleeping cabin taking up the entire roof , the driving station must hang behind it.
So a seat built into a roll bar? To install an upper wind-shield or not . It fits to scale, but its not really needed,
and its so foggy, you can't see thru it any way. Lets knock out the front glass, and it is a prop only !
I would love to construct the upper rails from steel , but weight has made has use much more expensive aluminum.
Now more weight with the upper truss, and rope lighting . Talking about weight ,next we install the 3-air conditioners.
Attachments
Brief sketch of what it might look like?<br />' Hand rail Dreams '
Brief sketch of what it might look like?
' Hand rail Dreams '
Aug. 2011 - Upper driving station,and seat fitted<br /> Thanks to Brian @ 'Speed Muffler on Bronson'
Aug. 2011 - Upper driving station,and seat fitted
Thanks to Brian @ 'Speed Muffler on Bronson'
Sept. 2011-  Upper rails raised and fitted<br />Rated -Safe for drunk passengers,  makes the boat look much more expensive !
Sept. 2011- Upper rails raised and fitted
Rated -Safe for drunk passengers, makes the boat look much more expensive !
Last edited by bikedumpdave on Wed Jan 08, 2014 7:30 pm, edited 2 times in total.
bikedumpdave
Posts: 39
Joined: Sat Dec 24, 2011 3:55 pm
Location: 407 catherine st Ottawa
Contact:

Re: Refitting - Sea Villa 32' LEREK2

Post by bikedumpdave »

Out-drive, Motor Chev V-8 runs good, but needs some of Andy Organs, special TLC. He installed a stainless screw in a hole in the hydrologic ram, that lifts the engine, saved us 800bucks! Got the motor running so smooth and idling so low . Also fandangled the shifter linkage for effortless gear changes and hopefully no more broken shifter cables.
Heat from the sun and rain that came in the windows, because there age and the angle. 'Gawkers' stairing in the boat.
That made us fabricate and install canvas window shades, sewn by Brebner Canvas Repairs [Peter @ 613-729-8178]
Generator, shore power plugs and cables, up graded, rope and bumpers added. New Battery's and plastic battery boxes,
with a med size nylon / plastic gas tank and venting. Almost ready, a little lipstick on our pig / a fresh coat of red paint.
Lets get some gas and 'CRUISE' . But we don't have a BBQ yet ? and the up stairs helm, steers opposite to the lower helm!
Wind 40k gust to 70, good crew, but , we ran into every thing we could hit. Jun 2013, but we are finally back- 8yrs
We miss our old boat, sailing it for 24 years. But who would have imagined, the piece of art our new boat has become!
Attachments
World Famous Master mechanic,  Andrew Organ<br />if they say it cant be fixed , call 613 489-0504
World Famous Master mechanic, Andrew Organ
if they say it cant be fixed , call 613 489-0504
1985-  'LEREK'   preparing for flotilla<br />36ft / 5 poly-urethane filled pontoons/  'positive floatation'
1985- 'LEREK' preparing for flotilla
36ft / 5 poly-urethane filled pontoons/ 'positive floatation'
Is It the same boat ,  is it a dressed up pig ?<br />Maybe just a 2014-' DeLorean'  Time Machine
Is It the same boat , is it a dressed up pig ?
Maybe just a 2014-' DeLorean' Time Machine
Last edited by bikedumpdave on Sun Oct 26, 2014 3:17 pm, edited 7 times in total.
bikedumpdave
Posts: 39
Joined: Sat Dec 24, 2011 3:55 pm
Location: 407 catherine st Ottawa
Contact:

Re: Refitting - Sea Villa 32' LEREK2

Post by bikedumpdave »

More time and money , and numerous works of wonder , will transform the vessel into a ,

2014- 'ALCAN TIME MACHINE'
Attachments
BBQ,  finally added
BBQ, finally added
I'm running out of ideas, oh ya and,  $ 'MONEY' $
I'm running out of ideas, oh ya and, $ 'MONEY' $
Last edited by bikedumpdave on Sun Oct 26, 2014 3:05 pm, edited 3 times in total.
dpearson
Posts: 130
Joined: Tue Jul 17, 2007 11:15 am
Location: Carp, Ontario
Contact:

Re: Refitting - Sea Villa 32' LEREK2

Post by dpearson »

Wow! Nice work Dave! And thanks for sharing the description and all the pictures.

David
bikedumpdave
Posts: 39
Joined: Sat Dec 24, 2011 3:55 pm
Location: 407 catherine st Ottawa
Contact:

Re: Refitting - Sea Villa 32' LEREK2

Post by bikedumpdave »

2014 - added a 50cc' MOTOPED' http://www.motoped-choose-your-adventure.com/

a bit of work to build from down hill bicycle parts ,

but needs no plates or ins. ,

just hooks on the side of the boat

around 105lbs.
Attachments
oh yes,  it has PEDDLES !!!
oh yes, it has PEDDLES !!!
yes,   RED, is my favorite color .
yes, RED, is my favorite color .
Last edited by bikedumpdave on Tue Oct 28, 2014 9:22 pm, edited 1 time in total.
bikedumpdave
Posts: 39
Joined: Sat Dec 24, 2011 3:55 pm
Location: 407 catherine st Ottawa
Contact:

Re: Refitting - Sea Villa 32' LEREK2

Post by bikedumpdave »

A little effect lighting
Attachments
PICT0873.JPG
PICT0874.JPG
PICT0872.JPG
bikedumpdave
Posts: 39
Joined: Sat Dec 24, 2011 3:55 pm
Location: 407 catherine st Ottawa
Contact:

Re: Refitting - Sea Villa 32' LEREK2

Post by bikedumpdave »

In the water early, so we needed to keep bissey with something,
the rear platform to store the motor cycle ?
Attachments
thanks to Joe at Manotick Marina ,<br />for letting us mount the platform in the water <br />to get it level
thanks to Joe at Manotick Marina ,
for letting us mount the platform in the water
to get it level
chair in case we want to Fish
chair in case we want to Fish
COMPLETE <br />without motor cycle
COMPLETE
without motor cycle
summerfest2017
Posts: 5
Joined: Sat Jan 28, 2017 1:11 pm

Re: Refitting - Sea Villa 32' LEREK2

Post by summerfest2017 »

2 x 370 solar panels , 2 x solar controllers , 4 x lrg. deep cycle battery's , and 2 x 3000 watt inverters [best thing we have done yet]

upgraded electrical with ground fault plugs every where

covered over front deck , and swing / trapeze , installed

new upper rope lights

raised front gunnels for heavy water travel

installed 24 ft stainless steal 3/8" wall 3 " pipe , grounding spike , c/w 40" inner retractable mud leg

pics to follow :roll:

PICT0010.JPG
summerfest2017
Posts: 5
Joined: Sat Jan 28, 2017 1:11 pm

Re: Refitting - Sea Villa 32' LEREK2

Post by summerfest2017 »

new cruising speakers

2 x 370 watt panels

winch to raise panels to 32 deg
Attachments
whinch to raise panels to 32deg
whinch to raise panels to 32deg
370watt panels
370watt panels
cruising speakers
cruising speakers
Last edited by summerfest2017 on Wed May 15, 2024 5:46 pm, edited 1 time in total.
summerfest2017
Posts: 5
Joined: Sat Jan 28, 2017 1:11 pm

Re: Refitting - Sea Villa 32' LEREK2

Post by summerfest2017 »

raised gunnels for heavy water
Attachments
PICT0036.JPG
PICT0038.JPG
PICT0031.JPG
summerfest2017
Posts: 5
Joined: Sat Jan 28, 2017 1:11 pm

Re: Refitting - Sea Villa 32' LEREK2

Post by summerfest2017 »

front deck cover frame, for shade mostly

and swing trapeze
Attachments
PICT0008.JPG
PICT0004.JPG
PICT0011.JPG
summerfest2017
Posts: 5
Joined: Sat Jan 28, 2017 1:11 pm

Re: Refitting - Sea Villa 32' LEREK2

Post by summerfest2017 »

24 ft - grounding spike and winch

c/w inner retract-able 1-1/4 in re bar 48 in long

and the old boat Dog Seairra
Attachments
PICT0026.JPG
PICT0024.JPG
PICT0028.JPG
Post Reply